Home > Other > Robots > Brooks Automation > Robots & Controllers - REPAIR SERVICE > ADE-351 Robot - REPAIR SERVICE
Email Link Tweet This Share on Facebook

ADE-351 Robot - REPAIR SERVICE

REPAIR SERVICE

Price: Call for Quote

Return Material Authorization

To request an RMA, click the button below and fill out the form or contact us directly.

RMA

ADE-351 Robot - REPAIR SERVICE
Click Image to Enlarge

Call for a repair service quote or fill out the RFQ form.

ADE-351 Robot Refurbishment - Scope of Work

Refurbishment is recommended for robots over 5 years old.

PTB Sales will perform the following:

1. Incoming Inspection

  • Attach Work Order to ADE-351 Robot
  • Picture taken of ADE-351 Robot's Configuration/Condition

2. Complete teardown and disassembly

  • Replace all wear items such as bearings and arm drive cables
  • Replace all Internal Flex Cables
  • Replace Vacuum tubing
  • Replace both Vacuum Solenoids
  • Replace both Vacuum Sensors
  • Replace R, T Harmonic Drive assemblies
  • Replace R,T, Z and X Servo Motor/encoders
  • Clean re-lubricate Z-axis lead-screw assembly
  • Clean re-lubricate Z-axis linear bearings
  • Replace Z-axis Drive Belt

3. Test

  • Test for vacuum leaks.
  • Check all axes alignment
  • Set arm retract and COP position
  • Check and adjust Theta “Dead Zone” as needed
  • Perform accuracy and repeatability tests per ADE specification
  • Perform 48 hour Burn-in test for repeatability

4. Final Quality Control Check List

  • Final Test Report attached to Robot
  • Replace Service Label
  • Protective covers installed on I/I connectors
  • Package with accordance with DOT Standards
  • Clean & bag for shipment
  • Warranty (1 Year)

ADE-351 Robot Enhanced Repair - Scope of Work

PTB Sales will perform the following:

1. Incoming Inspection

  • Attach Work Order to ADE-351 Robot
  • Picture taken of ADE-351 Robot's Configuration/Condition

2. Complete teardown and disassembly

  • All parts are inspected and cleaned with a High Pressure Parts washer
  • Inspect all wear items such as bearings and replace as necessary
  • Inspect internal Flex Cables, replace as needed
  • Inspect vacuum tubing and replace as needed
  • Replace Vacuum Solenoids as needed
  • Replace Vacuum Sensors as needed
  • Inspect R, T and Z-axis Servo Motors or encoders rework as needed
  • Inspect, clean and lubricate Harmonic Drive assemblies, replace as needed
  • Clean and Lubricate Linear bearings
  • Clean and Lubricate Z-axis lead-screw

3. Test

  • Test for vacuum leaks.
  • Perform Diagnostics testing
  • Check all axes alignment
  • Set arm retract and COP position
  • Check and adjust Theta “Dead Zone” as needed
  • Perform accuracy and repeatability tests per ADE specification
  • Perform 48 hour Burn-in test for repeatability

4. Final Quality Control Check List

  • Final Test Report attached to Robot
  • Replace Service Label
  • Protective covers installed on I/I connectors
  • Package with accordance with DOT Standards
  • Clean & bag for shipment
  • Warranty (6 months)

 

Request an RMA  Return Material Authorization

Need an exchange?  We recognize that some replacements are more critical than others or that it is not convenient to remove a pump without the replacement immediately at hand. On our form, check the box to request an exchange and we will follow up with current availability.

Procedures for shipping used equipment to PTB Sales:

There is a $300 Evaluation Fee. This gets applied to the cost of repair.

Questions? Please call our toll free number at 866-332-0500 or send an e-mail to our sales team!

Product Reviews

There are currently no customer reviews for this product.

Be the first to write a review!
We value your opinion. Please take a moment and share what you like or don't like about a product.

Write a review now