Home > Power Supplies > DC Sputtering > Advanced Energy > MDX > Advanced Energy MDX-II 15K Master

Advanced Energy MDX-II 15K Master

Request for Quote

To request a quote, click the button below and fill out the form.

RFQ

Manufacturer Part Number: 3152256-001
Advanced Energy MDX-II 15K Master
Click Image to Enlarge
Advanced Energy MDX-II 15K Master

USED Advanced Energy AE MDX-II 15K DC Magnetron Master Power Supply

Advanced Energy AE MDX-II 15K

Output Impedance Range

Each MDX is equipped with a built in impedance matching transformer. These tap-selectable transformers are available in high Z, standard Z or low Z configurations. With the proper transformer and tap, load impedances requiring voltages from 400 V to 1,250 V can be accommodated.

Output Regulation

The MDX can be used as a power, current or voltage source, depending on the method of output regulation selected. Since setpoint levels are stored in nonvolatile memory, they can be used in recovering from input power interruptions and to ensure repeatability from run to run.

The MDXL is DC magnetron source by rectifying a switching frequency of 17 - 31 kHz. The Sparc-le integrates into existing systems with both old and new MDX products.

Questions? Please call our toll free number at 866-332-0500 or send an email to our sales team!

Specifications MDX-II 15K MDX-II 30K
Recommended input cable 5-wire AWG 6, 600 V
Methods of control Full or restricted access, local or remote control, programmed or manual operation
Output connector Molded output connector
Size  (Depth is measured from the front of the rack ears; depth includes distance required for cable strain relief) 178 mm (H) x 483 mm (W) x 640 mm (D) (7" x 19" x 25.2") 280 mm (H) x 482 mm (W) x 640 mm (D) (11” x 19” x 25.2”)
Weight 36.3 kg (80 lbs) 63.5 kg (140 lbs)
Input voltages (internally selected) Either 380/400/415 VAC ± 10% or 440/460/480 VAC ±10%, 50/60 Hz, three-phase Y or Δ; maximum ground leakage current less than 3.5mA
Input current 30 A maximum 60 A maximum
0 to 15,000 W output power
    Chassis per system 1
    Output ripple voltage (% rms) 5
    Output ripple frequency 50 kHz
0 to 30,000 W output power
    Chassis per system 1
    Output ripple voltage (% rms) 2
    Output ripple frequency 100 kHz
Output display accuracy Within 1% of actual output level
Output parameters
    Tap 1 / 400 V 48.00 A 96.00 A
    Tap 2 / 500 V 37.50 A 75.00 A
    Tap 3 / 625 V 30.00 A 60.00 A
    Tap 4 / 800 V 24.00 A 48.00 A
    Tap 5 / 1,000 V 18.75 A 37.50 A
    Tap 6 / 1,250 V 15.00 A 30.00 A
Operating temperature Class 3K3 0°C to +40°C (Note 1) +32°F to +104°F
Operating relative humidity Class 3K2 20% to 80% (Note 2) +6 g/m3 to 23.5 g/m3
Operating air pressure Class 3K3 80 kPa to 106 kPa 800 mbar to 1,060 mbar (approximately 2,000 m above sea level)
Storage temperature Class 1K4 -25°C to +55°C -13°F to +131°F
Storage relative humidity Class 1K 35% to 95% +1 g/m3 to 29 g/m3
Storage air pressure Class 3K3 80 kPa to 106 kPa 800 mbar to 1,060 mbar (approximately 2,000 m above sea level)
Transportation temperature Class 1K4 -25°C to +55°C -13°F to +131°F
Transportation relative humidity Class 2K3 95% (Note 3) 60 g/m3 (Note 4)
Transportation air pressure Class 2K3 66 kPa to 106 kPa 660 mbar to 1,060 mbar (approximately 3,265 m above sea level)

 

Note 1. 40°C is the maximum allowed. The average over 24 hours must not exceed 35°C.

Note 2. Non-condensing

Note 3. Maximum relative humidity when the unit temperature slowly increases, or when the unit temperature directly increases from -25°C to +30°C

Note 4. Maximum absolute humidity when the unit temperature directly decreases from +70°C to +15°C

Request for Quote

Need modifications to this item? PTB Sales' expert team of engineers can configure products to your specific needs. Please follow the above link, and fill out the quote form.

USED Advanced Energy AE MDX-II 15K DC Magnetron Master Power Supply

These are passive front panels; let us know if you need a remote.

3152256001 / 3152256-001  15K 380/415V PFP
3152256002 / 3152256-002  15K
3152256005 / 3152256-005  15K 380/415V PFP
3152256009 / 3152256-009  15K 380/415V PFP
3152254210 / 3152254-210  15K 440/480 AFP
3152256007 / 3152256-007  15K 400V SLV CE
3152256200 / 3152256-200  15K 380/415 AFP
3152256202 / 3152256-202  15K 380/415 PFP BALZERS
3152256215 / 3152256-215  15K 380/415 AFP DEKO
3152256221 / 3152256-221  15K 380/415 PFP I&V_ARC CONTROL
3152255012 / 3152255-012  30K 480V PFP SLAVE
3152255015 / 3152255-015  30K
3152255213 / 3152255-213  30K 440/480 PFP MASTER
3152255215 / 3152255-215  30K 440/480 AFP MASTER