Advanced Energy AE Sparc-le V DC Pulsing ARC Handling Interface 3152330-003
Advanced Energy AE Sparc-le V DC Pulsing ARC Handling Interface 3152330-013.
The Sparc-le V clears arcs in 5ms and reduces the number of hard arcs, resulting in reduced particulates and increased process time. Its small size allows for easy integration into existing systems with both old and new MDX products.
Questions? Please call our toll free number at 866-332-0500 or send an email to our sales team!
|Control mode||Local (from the front panel) or remote (through the User port of Host port)|
|Arc counting||Counts and displays minor arcs, hard arcs, and total arc up to 9,999|
|Reverse voltage time|
|Self-run & active arc||
Adjustable in 1 μs increments, with reverse time range depending on frequency:
Frequency range (kHz) / Reverse time range (μsec)
Note: During Active Arc mode, the Sparc-le V is responding to conditions in the chamber; the frequency selection, then, serves only to limit the reverse recovery time. Thus for greatest flexibility in reverse recovery time, select 1 kHz.
|Self-run||Adjustable at 10%, 15%, or 20% of operating DC input voltage|
|Hard arc delay time|
|Self-run||Adjustable at 10, 30, or 50 μs|
|Self-run||Adjustable from 1kHz to 5 kHz (1kHz increments); from 20 kHz to 75 kHz (1 kHz increments); from 80 kHz to 100 kHz (5 kHz increments);|
|Active arc||Not applicable|
|Size||133 mm (H) x 483 mm (W) x 422 mm (D) (5.25" (H) x 19" (W) x 16.6"(D)) (with interlock cover and rack mounting ears)|
|Weight||17.2 kg (38 lbs)|
|DC input & output connectors|
|Standard||UHF type, female, Amphenol part number 83-1R OR • a CE (three terminal, multi-contact, pluggable) connector for use in Europe|
|Optional||MS-3470 connectors: male for input; female for output|
|Cable connector for DC input & output||UHF type, male, Amphenol part number 83-822 OR • mating connector for the CE connector (supplied with unit) OR • appropriate military style connector for MS-3470|
|DC input & output cables||RG-8 coaxial cable; output cable from the Sparc-le V to chamber not to exceed 10 ft. (3.048 m)|
|AC input voltage||
Use one of the following:
|DC input voltage||Any low-Z or standard-Z output from an MDX magnetron supply; however, the supervisory circuit requires a minimum of 1.5 A and 150 V before it is operational|
|DC current||30 A steady state maximum; No minimum current is required for operation. However, the supervisory circuit requires a minimum of 1.5 A and 150 V before it is operational.|
|Input & output DC polarity||Negative input/output (positive floating less than 100 V from ground)|
|Noise||< 88 dB|
|Operating||Class 3K3. Minimum 0°C, maximum 40°C (maximum value of average over 24 hr: 35°C). If the units are enclosed in cabinets ensure that the maximum ambient temperature is not exceeded.|
|Storage||Class 1K4. Minimum -25°C, maximum 55°C|
|Transportation||Class 2K3. Minimum -25°C, maximum 55°C (for short periods of up to 24 hr, the maximum is 70°C)|
|Operating||800 mbar minimum (approximately 2,000 m above sea level)|
|Storage||800 mbar minimum (approximately 2,000 m above sea level)|
|Transportation||660 mbar minimum (approximately 3,265 m above sea level)|
|Pollution degree||Two - Only non-conductive pollution occurs|
Need modifications to this item? PTB Sales' expert team of engineers can configure products to your specific needs. Please follow the above link, and fill out the quote form.
Advanced Energy AE Sparc-le V DC Pulsing ARC Handling Interface 3152330-003 3152330-013