Home > Vacuum Pumps > Turbo > Agilent Varian > TwisTorr & Turbo-V - REBUILT > Agilent Varian Turbo-V 1K-G - REBUILT

Agilent Varian Turbo-V 1K-G - REBUILT

Request for Quote

To request a quote, click the button below and fill out the form.


Manufacturer Part Number: 8698961R002
Agilent Varian Turbo-V 1K-G - REBUILT
Click Image to Enlarge
Agilent Varian Turbo-V 1K-G - REBUILT

Agilent Varian Turbo-V TV 1K-G Turbomolecular Vacuum Pump - REBUILT

The Turbo-V 1K-G is more than a pump. It is a dedicated pumping system, designed specifically for thin film deposition equipment. Its pumping stages, and the entire pump structure, are optimized to work with very high flows of argon gas and very high temperatures. Additionally, there is a possibility to drive the pump with a remote rack controller or an on-board controller. All of these assets make the Agilent Turbo-V 1K-G the optimum pumping solution for the coating industry.

Questions? Please call our toll free number at 866-332-0500 or send an email to our sales team!

Agilent Turbo-V 1K-G

Turbo-V 1K-G ISO-160 ISO-200
Pumping speed (w/out inlet screen)
    Ar 750 l/s 1,040 l/s
    N2 810 l/s 1,080 l/s
    He 950 l/s 1,150 l/s
    H2 680 l/s 730 l/s
Compression ratio
    Ar > 5 x 108
    N2 > 5 x 107
    He > 4 x 104
    H2 > 1.5 x 104
Base pressure w/ recommended forepump > 1 x 10-10 mbar
(According to standard DIN 28 428, the base pressure is that measured in a leak-free test dome, 48 hours after the completion of test dome bake-out, with a Turbopump fitted with a ConFlat flange and using the recommended pre-vacuum pump)
Inlet flange ISO-160 ISO-200
Foreline flange KF-25 NW KF-40 NW
Rotational speed 45,660 rpm
Start up time < 5 minutes
Recommended forepump > 20 m3/h (TriScroll 600, DS 602, HS 452, HS 652) > 36 m3/h
Operating position Any
Operating ambient temperature 5°C to 35°C
Bakeout temperature 80°C at inlet flange max. (ISO flange)
Vibration level (displacement) < 0.01 μm at inlet flange
Cooling requirements Water
Coolant water Minimum flow: 200 l/h (0.89 GPM)
Temperature: +10°C to +20°C
Pressure: 3 to 5 bar (45 to 75 psi)
Noise level < 45 dB(A) at 1 meter
Power supply
    Input voltage 100 – 240 VAC
    Input freq. 50 – 60 Hz
    Max input power 600 VA
    Stand-by power 30 to 35 W
    Max operating power 400 W using Nitrogen or lighter gases (WATER cooling setting)
260 W using ARGON (AIR cooling setting)
Protection fuse (Navigator controller) 1 x 6.3 A
Compliance with UNI EN 292-1
UNI EN 292-2
EN 55011Cl. A
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61010-1
EN 1012-2
Power cable w/ European or NEMA plug 3 meters long (optional)
Serial communication kit RS232 cable w/ a 9-pin D type male connector and a 9- pin D type female connector, and Navigator software (optional)
Installation Category II
Pollution Degree 2
Storage temperature -20°C to 70°C
Weight 26.8 kg (59.1 lbs) 26.7 kg (58.9 lbs)
Navigator controller 5.4 kg (12 lbs)

Request for Quote

Need modifications to this item? PTB Sales' expert team of engineers can configure products to your specific needs. Please follow the above link, and fill out the quote form.

Agilent Varian Turbo-V TV 1K-G Turbomolecular Vacuum Pump - REBUILT

8698961R002 / 869-8961R002  ISO-160F
8698962R001 / 869-8962R001  ISO-200F 


9698978M005 / 969-8978M005
9699454M002 / 969-9454M002