Agilent VS MD15 / MD30+ Mobile Helium Leak Detector - REBUILT
Request for Quote
To request a quote, click the button below and fill out the form.
Agilent Varian VS MD15 / MD30+ Mass Spectrometer Mobile Helium Leak Detector - REBUILT
This product can be purchased or rented. Click the "RFQ" button to specify your needs.
Features & Benefits
- Fully automated start-up and calibration maximizes productivity
- Programmable test sequences improves testing efficiency
- Color touch screen provides excellent clarity, even at wide angles
- High test port pressure allows for detection of large leaks
- 12-range MDL (helium sensitivity) meets the most stringent leak test requirements
- New high efficiency ion source and beam optics optimize sensitivity and mass separation
- Robust Faraday cup technology delivers proven reliability with low cost of ownership
- Allows testing of large systems by a single operator
- Leak detector can be located outside cleanroom to prevent contamination
Questions? Please call our toll free number at 866-332-0500 or send an email to our sales team!
|Specifications||VS MD15||VS MD30+|
|Fore pump type||IDP-15||TS-620|
|Pump speed 50/60 Hz||250/210 l/min||500/420 l/min|
|Minimum detectable leak||5 x 10-12 atm cc/sec|
|Internal pump version||DS-42 / IDP-3|
|Turbomolecular pump||Navigator™ turbomolecular pump specifically designed for leak detection|
|Leak units||atm-cc/sec, mbar-l/sec, torr-l/sec, Pa-m3/sec, std. ft3/year|
|Peak pumping speed||
|Helium response time||0.5 second, within 66% of peak reading within the given time. Per AVS 2.1|
|Test port||NW-25; A 11/8" (28 mm) ID Compression Port is available as an accessory|
|Recommended Operating Ambient Conditions|
|Installation||Indoor use only. Altitude up to 2000 m (6,400’), Material Group III, POLLUTION DEGREE 2 according to EN61010-1 Standard, Class 1|
|Operating temperature||System: +12° C to +45° C (wet and dry pumps); Fore pump limited on the low ends and turbo pump limited on the high ends|
|Humidity||Maximum relative humidity (HR) 90%|
|Heat load||1,000 W (+/- 5%)|
|Air pressure||563 Torr (75 kPa) to 795 Torr (106 kPa)|
|Maximum system vibration||3 G’s (turbo limit)|
|Storage ambient conditions||Relative humidity: 0% to 95%, non-condensing. Temperature: -20°C (-4°F) to +60°C (140°F)|
Max. branch circuit breaker: 20A with motor-rated time delay
|Weight||98 kg||96 kg|
|LCD display||Size = 112 mm x 150 mm, overall, 90 mm x 115 mm viewing area (HxW) Color, ¼ VGA (320 x 240), backlit|
For particular Safety and EMC Standards see Declaration of Conformity
|Single rotation speed||Turbo: 70K rpm|
|Leak test range||E-11 to E-4|
|Maximum spectrometer pressure||1E-04 Torr - Filament turns off when pressure exceeds this point|
|Contra cross over||10 Torr decreasing, 12 Torr increasing|
|Sensitivity in high pressure test mode||1 x 10-8 atm.cc.sec|
Need modifications to this item? PTB Sales' expert team of engineers can configure products to your specific needs. Please follow the above link, and fill out the quote form.
Agilent Varian VS MD15 / MD30+ Mass Spectrometer Mobile Helium Leak Detector - REBUILT VS MD15 G8601-64004 100/115 VAC IDP-15 external VS MD15 G8601-64005 230 VAC IDP-15 external VS MD30+ VSMD301 100/115 VAC TS620 external VS MD30+ VSMD302 230 VAC TS620 external This helium leak detector has the following options installed: Wireless Remote, Base Unit: VSFACWB, VSFLDWB I/O board with flapper box cable: VSFACIO, VSFLDIO Leak Test Data Wizard Software: VSLTDW 11/8 in. Compression Test Port (N2 vent hardware): VSFLDCP
There are currently no customer reviews for this product.
Be the first to write a review!
We value your opinion. Please take a moment and share what you like or don't like about a product.