Home > Power Supplies > E / Ion-Beam > Temescal > Airco Temescal Ferrotec Simba 2

Airco Temescal Ferrotec Simba 2

Request for Quote

To request a quote, click the button below and fill out the form.


Manufacturer Part Number: 0040-6720-3
Airco Temescal Ferrotec Simba 2
Click Image to Enlarge
Airco Temescal Ferrotec Simba 2

USED Airco Temescal Ferrotec Simba 2 E-Beam Power Supply

Temescal’s Simba 2 is a constant voltage, 15 kW electron beam power supply designed to power and control up to three electron beam sources simultaneously. Compatible with sources employing either permanent magnet or electromagnetic deflection, the Simba 2 power supply provides stable output at all levels as well as adaptability, ease of integration, and safety and convenience for operating and service personnel.

The Simba 2 power supply is capable of continuously delivering -10 kV at 1.5 A as well as filament power for up to three electron beam sources. This high level of output power makes it possible to achieve substantial deposition rates in the most demanding production environments.

Questions? Please call our toll free number at 866-332-0500 or send an email to our sales team!

High-voltage output 15 kW at 10 kV, supporting up to three e-guns simultaneously Fully adjustable within either of two output ranges, -3 kV to -7 kV or -6 kV to -10 kV regulated to ±1%
Beam current Fully adjustable from 0 to 1.5 A Regulated to ±1%
Gun filament transformer output     12 VAC, 70 A maximum per source
Longitudinal coil current output Adjustable from 0 to 3 A into a 5-ohm load
Remote control inputs
    HV request 0 to +10 VDC
    Emission current request 0 to +10 VDC
Digital meters
    HV control panel 0 to 15 kV or total power supply current, 0 to 2.0 A FS
    Gun control panel emission, filament, or longitudinal coil current, 0 to 2.0 A FS
Tetrode tube Air cooled. Provides accurate voltage control, voltage regulation to ±1%, and constant ground reference.
Beam sweep capability Available with optional programmable sweep
Power module weight 720 lbs. (324 kg)
    Power module 40 in. H x 27-3/4 in. D x 23-1/4 in. W (1,016 mm x 705 mm x 590 mm)
    Gun interface chassis 7 in. H x 19 in. W (178 mm x 483 mm), rack mountable
    Remote controller 5-1/4 in. H x 19 in. W (133mmx 483 mm), rack mountable
Utility Power for Power Module
    208/240 VAC model 208/240 VAC, 50/60 Hz, 80 A (90-A inrush), 3-phase delta (4-wire cable; no neutral required)
    380 VAC model 380 VAC, 50/60 Hz, 50 A (60-A inrush), 3-phase delta
    480 VAC model 440/480 VAC, 50/60 Hz, 40 A (50-A inrush), 3-phase delta
Environment Must be free of corrosive fumes and vapors)
Ambient temperature must remain between 50 to 90°F (10 to 32°C)
Humidity: 50% maximum

Request for Quote

Need modifications to this item? PTB Sales' expert team of engineers can configure products to your specific needs. Please follow the above link, and fill out the quote form.

USED Airco Temescal Ferrotec Simba 2A E-Beam Power Supply

0040-6720-1  Single-gun three-phase 208/240 VAC
0040-6720-2  Single-gun 3-phase 380/415 VAC
0040-6720-3  Single-gun 3-phase 480 VAC
06611-7330-1  Single-gun 208/240 VAC
06611-7330-2  Single-gun 380 VAC
06611-7330-3  Single-gun 480 VAC
06611-7330-12  Two-gun 208/240 VAC
06611-7330-22  Two-gun 380 VAC
06611-7330-32  Two-gun 480 VAC
06611-7330-13  Three-gun 208/240 VAC
06611-7330-23  Three-gun 380 VAC
06611-7330-33  Three-gun 480 VAC