ANEST IWATA ISP-500C - NEW
ANEST IWATA ISP-500C Dry Scroll Vacuum Pump - NEW
This 10% off New Anest Iwata promotion goes until December 30th.
With OEM one year warranty. PTB is now an authorized distributorship within the ANEST IWATA distribution network, selling all their models of scroll pumps.
The ISP series of vacuum pumps offer a clean vacuum environment and eliminate the nuisance of cumbersome lubricant maintenance or sealing water administration. The ISP series is free from installation restrictions because of its air-cooled system. ISP vacuum pumps maintain low power consumption from atmosphere to maximum pressure.
Questions? Please call our toll free number at 866-332-0500 or send an email to our sales team!
The ISP-500C VFD (Variable Frequency Drive) provides two-speed/variable-speed operation, a 3-year maintenance interval, and a 15-month warranty.
The new ISP-500C VFD offers the following advantages over earlier ISP-500C versions:
- Fast tack time from atmospheric pressure down to the crossover pressure of a turbo or diffusion pump.
- Energy-saving idle speed mode for backing high vacuum pumps. Lower stress and wear on the pump due to operation at much lower rotational speeds while backing high vacuum pumps.
- At 100% duty cycle, average service interval is now extended to three years. The cost savings and downtime over the life of the pump versus a non-VFD pump in an identical application will be considerable!
- Acoustic noise at low speed is reduced vs. single speed ISP-500C pumps.
- The VFD controller provides for either manual or remote operation.
- The VFD controller provides power for an optional inlet isolation valve with time delay re-open of the valve.
- The integrated temperature monitor informs the operator when recommended operating temperatures have been exceeded by enabling a visual alarm when allowable temperatures are exceeded.
- This feature protects the pump against excessive tip seal wear and enables the scheduled shut down of the pump while not interrupting vacuum processing.
| Displacement | 50 Hz 60 Hz |
500 L/min 600 L/min |
||||||||||
| Ultimate pressure Pa | ≤ 1 | |||||||||||
| Leak tightness Pa • m3/s | ≤ 1.0 x 10-5 | |||||||||||
| Max. inlet pressure | Atmospheric pressure | |||||||||||
| Ambient operating temperature | 5°C ~ 40°C | |||||||||||
| Type | Single-phase induction motor 4P Totally-enclosed Insulation Class B IP44 Capacitor start TP212 Automatic Reset Type |
3-phase induction motor 4P Totally-Enclosed Insulation Class B IP44 |
||||||||||
| Output | 0.6 kW | |||||||||||
| Voltage | 100 V | 115 V | 200 V | 230 V | 200 V | 208 V | 230 V | 380 V | 400 V | 415 V | 460 V | |
| Rated current A | 50 Hz 60 Hz |
8.5 10.0 |
- 8.6 |
4.3 4.8 |
3.9 4.0 |
2.7 2.8 |
- 2.6 |
- 2.5 |
1.57 - |
1.57 - |
1.63 - |
- 1.47 |
| Revolution min-1 {rpm} | 50 Hz 60 Hz |
1,430 1,660 |
- 1,720 |
1,430 1,690 |
1,450 1,730 |
1,460 1,740 |
- 1,760 |
- 1,760 |
1,470 - |
1,470 - |
1,470 - |
- 1,770 |
| Noise level at 1m dB(A) w/ air-flush ON |
≤ 62 ≤ 70 |
≤ 60 ≤ 68 |
||||||||||
| Inlet connection | NW40 | |||||||||||
| Outlet connection | NW25 | |||||||||||
| Direction of inlet | Horizontal (vertical) | |||||||||||
| Dimensions | 443 x 328 x 372 mm 17.4 x 12.9 x 14.6 in |
372 x 328 x 372 mm 14.6 x 12.9 x 14.6 in |
||||||||||
| Mass | 44 kg (97 lbs) | 38 kg (83.7 lbs) | ||||||||||
| Cooling system | Air-cooled | |||||||||||
| Others | w/ hour counter and air-flush | |||||||||||
Need modifications to this item? PTB Sales' expert team of engineers can configure products to your specific needs. Please follow the above link, and fill out the quote form.
ANEST IWATA ISP-500C Dry Scroll Vacuum Pump - NEW ISP-500C-SH 1-phase 100-115V, Horizontal inlet ISP-500C-SV 1-phase 100-115V, Vertical inlet ISP-500C-TH 3-phase 200-230V, Horizontal ISP-500C-TV 3-phase 200-230V, Vertical ISP-500C-SV-D1 1-phase 100-115V VFD: Dual speed operation, Remote & manual control ISP-500C-SV-D2 1-phase 200-230V VFD: Dual speed operation, Remote & manual control
Related Products
