Home > Vacuum Pumps > Cryo > CTI-Cryogenics > Compressors - REBUILT > Brooks CTI-Cryogenics IS-1000 Compressor - REBUILT
Email Link Tweet This Share on Facebook

Brooks CTI-Cryogenics IS-1000 Compressor - REBUILT

Green Tag - Best Offerings

Manufacturer Part Number: 8135921G002
Price: $9,700.00
Brooks CTI-Cryogenics IS-1000 Compressor - REBUILT
Click Image to Enlarge

Brooks CTI-Cryogenics IS-1000 Helium Compressor - REBUILT

The IS-1000 has Intelligent, high efficiency compressor technology for On-Board IS cryopumps. The IS-1000 compressor will support up to six On-Board IS-8F cryopumps in the same footprint as a 9600 compressor.

Questions? Please call our toll free number at 866-332-0500 or send an email to our sales team!

  Low Voltage High Voltage
Operating voltage 180 - 253 VAC 342 - 528 VAC
Line frequency 50 / 60 Hz
Phase 3
Nominal input power 5.8 KW
Rated full load / locked rotor current 19 / 85 10 / 42
Minimum electrical service 30 Amps 20 Amps
Maximum inlet temperature 90°F (32°C)
Minimum inlet temperature 50°F (10°C)
Flow rate 2.75 ± 1.25 gpm (10.4 ± 4.7 lpm)
Maximum inlet pressure 100 psi (6.9 bars)
Alkalinity 6.0 - 8.0 pH
Calcium carbonate < 75 ppm
Deionized water usage Do not use above 100,000 ohm-cm resistivity
Input power cable
(Customer supplied)    
600 VAC
10 Gauge, 3 conductor wire with ground
Must conform to local electrical codes
Ambient operating temperature range     50 - 100ºF (10 - 38ºC)
Gas supply connector
Gas return connector
EMO remote control receptacle
1/2 in. Aeroquip self-sealing coupling, male thread.
1/2 in. Aeroquip self-sealing coupling, female thread.
Mates with P5 connector part number MS3106A
Adsorber service schedule 3 Years
Weight 210 lbs / 95 kg 222 lbs / 102 kg

Request for Quote

Need modifications to this item? PTB Sales' expert team of engineers can configure products to your specific needs. Please follow the above link, and fill out the quote form.

Brooks CTI-Cryogenics IS-1000 Helium Compressor - REBUILT

8135921G002  low voltage
8135926G002  high voltage

This product has been refurbished by PTB Sales, Inc. PTB Sales is not affiliated with Brooks Automation, Inc., the Original Equipment Manufacturer. In some cases, PTB Sales uses processes and parts that are different from those used by the OEM, and the OEM expressly disclaims any warranty obligations with respect to this refurbished product.

Product Reviews

There are currently no customer reviews for this product.

Be the first to write a review!
We value your opinion. Please take a moment and share what you like or don't like about a product.

Write a review now