Home > Vacuum Pumps > Dry Scroll > Edwards > nXDS & XDS - REBUILT > Edwards ESDP30 - REBUILT

Edwards ESDP30 - REBUILT

Manufacturer Part Number: A710-03-907
Price: $4,900.00
Edwards ESDP30 - REBUILT
Click Image to Enlarge
Edwards ESDP30 - REBUILT

Edwards ESDP30 Dry Scroll Vacuum Pump - REBUILT

Rebuilt Edwards scroll pumps have been completely disassembled, cleaned and carefully inspected for wear. The pumps are assembled with new tip seals, shaft seals and bearings and then undergo an extended performance test. Certified technicians perform a quality assurance inspection prior to shipping.

Questions? Please call our toll free number at 866-332-0500 or send an email to our sales team!

Edwards ESDP30

Displacement 50 Hz: 30 m3h-1 / 17.6 ft3min-1
60 Hz: 36 m3h-1 / 21.2 ft3min-1
Peak pumping speed 50 Hz: 25 m3h-1 / 16.1 ft3min-1
60 Hz: 30 m3h-1 / 17.6 ft3min-1
Ultimate total vacuum 1 x 10-2 mbar / 7.5 x 10-3 Torr
Inlet connection NW40
Outlet connection NW25
Maximum allowed inlet pressure 1,000 mbar
Maximum allowed outlet pressure 1,150 mbar
Motor power 0.6 kW
Electrical supply
    single-phase 50 Hz
    1-phase 60 Hz
    three-phase 50 Hz
    3-phase 60 Hz

100/200/230 V
100/115/200/230 V
200/380/415 V
200/208/230/460 V
Recommended contactor rating 3-phase    
    200-230 V
    380-460 V
5 A
3 A
Enclosure rating IP44
Leak tightness (static) 10-4 mbar l/s-1
Operating temperature range 5 to 40°C / 41 to 104°F
    3-phase pump
    1-phase pump

40 kg / 88 lb
46 kg / 101 lb

Request for Quote

Need modifications to this item? PTB Sales' expert team of engineers can configure products to your specific needs. Please follow the above link, and fill out the quote form.

Edwards ESDP30 Dry Scroll Vacuum Pump - REBUILT

A71003907 / A710-03-907  ESDP30  universal 3-phase

The GVSP30 replaces the ESDP30A and the ESDP30. It has a gas ballast facility and a new position for the exhaust outlet port (which allows any condensates to drain from the pump).

The ESDP is the oldest ANEST IWATA "A" series pump. The FS1, FS2 and OS plates are not interchangeable with the current "C" series pumps. If these oldest pumps have damaged plates then they are not rebuildable.