Home > Vacuum Pumps > Dry > Edwards > iXH & iXL - NEW > Edwards iXL120N - NEW

Edwards iXL120N - NEW

Request for Quote

To request a quote, click the button below and fill out the form.

RFQ

Edwards iXL120N - NEW
Click Image to Enlarge
Edwards iXL120N - NEW

Edwards iXL120N Semiconductor Dry Vacuum Pump - NEW

The iXL120 is a low energy, compact dry pump system that can be mounted on tool or remotely. It is designed to give extremely low cost of ownership. The iXL120 is intended only for use on clean duty applications. The iXL120 is not intended for use with potentially flammable, corrosive, toxic or other hazardous gases since these gases or oxygen can mix within the pump system.

Questions? Please call our toll free number at 866-332-0500 or send an email to our sales team!

Typical peak pumping speed (no gas purge/cold pump)     110 m3/h-1 / 65 cfm
Ultimate pressure 0.01 mbar / 8 mTorr
Pump inlet flange ISO-63 / NW50
Exhaust gas outlet NW25
Intended use Indoor use
Operating ambient temperature range 5 to 40°C
Storage ambient temperature range -45 to 55°C
Maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C
Maximum operating altitude up to 2,000 m
Pollution degree II (IEC 61010) (Normally only non-conductive pollution occurs. Occasionally, however, temporary conductivity caused by condensation must be expected)
Atmosphere Non flammable and non-corrosive
Degree of protection provided by enclosure IP31D (EN60529: Degrees of protection provided by enclosures)
Dimensions 450 x 230 x 275 mm
Mass 59 kg
Noise level (at ultimate) < 55 dB(A)
Vibration level at inlet < 1.5 mm s-1
Vibration to the floor (when docked) < 0.05 mm s-1
Initial force to push the pump 0.06 kN
Sustained force to push the pump 0.04 kN
Warm up time to nominal pumping performance 45 min

Request for Quote

Need modifications to this item? PTB Sales' expert team of engineers can configure products to your specific needs. Please follow the above link, and fill out the quote form.

Edwards MODEL iXL120N Semiconductor Dry Vacuum Pump - NEW

CODE No A541-14-010 / A54114010  iXL120N  E 200-460V 3/8 QC Water Fittings
CODE No A541-14-020 / A54114020  iXL120N  E 200-460V 1/4 QC Water Fittings
CODE No A541-14-210 / A54114210  iXL120N  E 200-460V SPI TIM 3/8 QC Water Fittings
        A541-14-410 / A54114410  iXL120N  E 200-460V TEL 3/8 QC Water Fittings
        A541-14-011 / A54114011  iXL120N  E 200-460V 3/8 QC Water Fittings Flow Cont Valve
        A541-14-411 / A54114411  iXL120N  E 200-460V TEL 3/8 QC Water Fittings Flow Cont Valve