Home > Vacuum Pumps > Turbo > Edwards > nEXT & EXT - REBUILT > Edwards nEXT400D - REBUILT

Edwards nEXT400D - REBUILT

Manufacturer Part Number: B832-00-318
Price: $6,000.00
Quantity:
Edwards nEXT400D - REBUILT
Click Image to Enlarge
Edwards nEXT400D - REBUILT

Edwards nEXT400D Turbomolecular Vacuum Pump - REBUILT

The nEXT400D is a hybrid bearing compound turbo pump available with either an ISO-160 or a CF-160 inlet flange and has a N2 pumping speed of 400 l/s-1. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and true user serviceability. They feature 24V to 48Vd.c. sensor less motors with a built in drive that is fully compatible our range of TAG and TIC controllers. They are available pre-set for 80W or 160W maximum power, the former enabling use with our 100W TIC controllers are also recommended for pumping Argon, but with a longer ramp time to full operating speed.

A basic pump system would require a nEXT400D pump, a TAG or TIC controller, either an air or water cooling accessory or a suitable backing pump.

  • Value for money - exceptional pumping speeds and compression ratios
  • No unplanned downtime - field proven reliability in the most demanding environments
  • Easy integration - standard fit in many scientific instruments
  • Reliability for peace of mind - over 200,000 turbomolecular pumps installed
  • Low cost of ownership - end user serviceable

Questions? Please call our toll free number at 866-332-0500 or send an email to our sales team!

Edwards nEXT400D

Inlet flange DN 160 ISO-K / DN 160 CF
Outlet flange DN 25 NW
Pumping speed  
    N2 400 l/s-1
    He 390 l/s-1
    H2 325 l/s-1
Compression ratio D / T  
    N2 > 1 × 1011
    He 1 x 10>8 / > 1 x 108
    H2 5 x 105 / 1 x 106
Ultimate pressure with RV backing pump ISO/CF < 1 x 10-8 / < 1 x 10-10 mbar
Recommended backing pump* RV12 / nXDS10i
Vent port 1/8 inch BSP female
Purge port 1/8 inch BSP female
Max continuous inlet flow (Nitrogen) †  
Water cooling (water at 15°C, ambient temp at 40°C)     105 sccm
Forced air cooled, 35°C ambient 90 sccm
Pump rotational speed  
Nominal rotational speed 60,000 rpm
Standby rotational speed Variable from 33,000 to 60,000 rpm (42,000 rpm default)
Programmable power limit settings Variable from 50-200W (160W default)
Start time to 90% speed D / T 160 W 155 / 175
Analogue outputs Pump rotational speed;
Power consumption; Pump temp; Controller temp
Cooling method Forced air / water
Ambient air temp for forced air cooling 5 - 35°C
Min cooling water flow rate (water 15°C) 15 l/h-1
Water temp range 10 - 20°C
Max inlet flange temp 80°C
Operating attitude Vertical and upright, through to 
Horizontal +/- 2°
Noise level at 1 metre < 45 dB(A)
Max magnetic field pump can tolerate 5 mT
Recommended controller TIC 200 turbo and instrument controller
Quiescent electrical power Typically 20W

Request for Quote

Need modifications to this item? PTB Sales' expert team of engineers can configure products to your specific needs. Please follow the above link, and fill out the quote form.

Edwards MODEL: nEXT400D Turbomolecular Vacuum Pump - REBUILT

CODE: B832-00-300 / B83200300  nEXT400D  ISO-160 160W
CODE: B832-00-318 / B83200318  nEXT400D  ISO-160 160W
CODE: B832-00-401 / B83200401  nEXT400D  CF-160 80W
      B832-00-301 / B83200301  nEXT400D  ISO-160 80W
      B832-00-400 / B83200400  nEXT400D  CF-160 160W
      B832-00-816 / B83200816  nEXT400DHQ ISO-160 160W
      B832-30-300 / B83230300  nEXT400DL  ISO-160 160W
      B832-00-816 / B83200816  nEXT400IID   160W
      B833-00-300 / B83300300  nEXT400T HC  ISO-160 160W
      B833-00-301 / B83300301  nEXT400T HC  ISO-160 80W
      B833-00-400 / B83300400  nEXT400T HC  CF-160 160W 
      B833-00-401 / B83300401  nEXT400T HC  CF-160 80W