Home > Vacuum Pumps > Dry Scroll > Edwards > XDS - REPAIR SERVICE > Edwards XDS35i - REPAIR SERVICE
Email Link Tweet This Share on Facebook

Edwards XDS35i - REPAIR SERVICE

REPAIR SERVICE

Minor: $1,225.00
Major: $2,100.00

Return Material Authorization

To request an RMA, click the button below and fill out the form or contact us directly

RMA

Edwards XDS35i - REPAIR SERVICE
Click Image to Enlarge

PTB Sales has factory trained technicians handling all the stages of the dry scroll pump rebuild.

After years of experience our evaluators have come to recognize slight damage, that if left un-repaired may cause further damage resulting in poor pumping performance and even premature failure.

We have developed specific procedures in conjunction with specialized tooling to make sure that critical alignment of the consumables will result in proper pump performance. Scroll pumps require careful handling and cleaning methods different from the more robust vane pumps.

One year warranty service on all Edwards XDS dry scroll pump models. The warranty does not cover tip seal maintenance. For example, per OEM specs, scroll pump tip seals must be replaced every 8,000 hours, or slightly less than 11 months, to maintain good base pressure.

Edwards XDS35i - Major Scope of Work

PTB Sales will perform the following:

1. Incoming Inspection

  • Attach work order to pump
  • Picture taken of mechanical configuration

2. Receipt and Inspection

  • Motor Operational Test
  • Complete decontamination of internal and external parts
  • Hazardous materials disposed in accordance with environmental regulations

3. All parts are inspected and cleaned

  • High Pressure Parts washer as required
  • Corncobb blaster

4. Parts are dimensionally evaluated

5. Rebuild

  • Diagnostic check of motor
  • Replace OS and motor shaft bearings
  • Replace tip seals
  • All O-rings replaced with new

6. Final Test

  • 24 hour burn in of tip seals
  • Final test – (Verify ultimate pressure and current)

7. Packaging and Shipping

  • Paint pump
  • Apply all safety and startup labels
  • Test reported completed
  • QC report created
  • Package pump and ship

Request an RMA  Return Material Authorization

Need an exchange?  We recognize that some replacements are more critical than others or that it is not convenient to remove a pump without the replacement immediately at hand. On our form, check the box to request an exchange and we will follow up with current availability.

Procedures for shipping used equipment to PTB Sales:

  • Seal openings.
  • Attach our pump declaration form to the equipment to declare what contaminates the equipment has been exposed to.

There is a $300 Evaluation Fee. This gets applied to the cost of repair.

Questions? Please call our toll free number at 866-332-0500 or send an email to our sales team!

Product Reviews

There are currently no customer reviews for this product.

Be the first to write a review!
We value your opinion. Please take a moment and share what you like or don't like about a product.

Write a review now