Home > Power Supplies > RF Plasma > MKS ENI > ENI 13.56 MHz > MKS ENI PL-2HF Plasmaloc

MKS ENI PL-2HF Plasmaloc

Request for Quote

To request a quote, click the button below and fill out the form.

RFQ

MKS ENI PL-2HF Plasmaloc
Click Image to Enlarge
MKS ENI PL-2HF Plasmaloc

USED MKS ENI PL-2HF Plasmaloc RF Power Generator

MKS ENI PL-2HF

Questions? Please call our toll free number at 866-332-0500 or send an email to our sales team!

Frequency coverage 90 - 460 kHz
Frequency stability Better than 0.1 % from 0 to 45 degrees Celsius ambient after 5 minutes warm up
Match plasma load impedance 50 - 600 ohms
7 positions switch selectable
Maximum leveled power output     1,400 watts, forward or load
AC power requirements 115V ±8%, 50-60 Hz
fused line at 35 amperes capacity
Mismatch protection The unit will tolerate 250 watts of power reflected from the load (gas plasma), subject to operation of the thermal protection. The unit will foldback the forward power to maintain the 250W of reflected power should the load impedance exceed the allowable limits.
Thermal protection Thermostatic protection provides automatic cut-out should the power transistors overheat due to load mismatch or cooling system failure.
Power meter True average reading accurate to ±4% of full scale (0 to 2,000 watts). Front panel switch permits measurement of the-forward power (power leaving the generator) and the actual power absorbed by the load.
Output connector Type N
Operating temperature 0 to 45°C ambient
Size (H x W X D) 17.5 X 17 X 25.625" (44.45 x 43.18 x 65.0875 cm)
Weight 87 lbs (39.5 kg)

Request for Quote

Need modifications to this item? PTB Sales' expert team of engineers can configure products to your specific needs. Please follow the above link, and fill out the quote form.

USED MKS ENI PL-2HF Plasmaloc RF Power Generator